K Rend TC-Additiv Accelerator 250ml

Approx Consumption

• 1x 250ml bottle per 25kg tub of K Rend TC.

What does TC-Additiv do?

It accelerates the curing time enabling faster completion of jobs and allowing users to apply render all year-round.

When can you use TC Additiv?

Our TC-Additiv is intended for use with thin coat renders such as the K Rend Silicone TC range. It should be mixed directly into the render bucket prior to application. TC-Additiv is ideal for use at lower temperatures.

How should TC-Additiv be prepared for use?

250ml of TC-Additiv should be added to each 25kg tub of K Rend Silicone TC coloured render and mixed using an electric paddle mix. No other materials should be added. The correct proportions of TC-Additiv should always be used to achieve the best results. Please note that adding more than the specified amount of TC-Additiv will not further reduce drying times.

How is TC-Additiv applied?

Preparation of TC-Additv should take place just before application. The thin coat render should be applied as normal. Protective cover should still be applied around the rendered elevation during wet weather to avoid wash-off.

What are the required weather conditions for applying TC-Additiv?

Minimum air and substrate temperature +5°C, with up to a max. 85% relative air humidity. Maximum air and substrate temperature +15°C. Higher temperatures and direct sunlight should be avoided to ensure a consistent finish is achieved (e.g. to prevent colour variation, crack formation etc.)