K Rend Base Coats

K Rend Standard UF base coat is a high, general purpose render, for use over medium density blockwork as a primary coat for K Rend finishes, and is applied by hand or spray.

K Rend HP12 is a high polymer base coat designed to provide enhanced performance on difficult substrates. The enhanced properties allow for increased water resistance and easier adhesion. This K Rend base coat can be applied either by hand or spray, though in some cases, the use of a scrim cloth may be required.

K Rend HP14 base coat is a high polymer base designed to provide enhanced performance on difficult substrates. This cost effective solution is also used for its flexibility and high tensile strength on thin coat systems. It has increased water resistance and adhesion. It may be applied by hand or by spray and the use of scrim cloth may be required.

K Rend HPX Base offers extremely high performance render utilizing high polymer technology and fibres. It is used on unusual substrates requiring greater flexibility and adhesion. It may be hand or spray applied and usually requires the use of scrim cloth.

K Rend R10 is a modified acrylic bonding coat designed to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics. R10 is a low odour, ready to use primer and is quick and easy to apply by roller or brush.

K Rend R7 Acrylic is a modified Acrylic emulsion used to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics.

↓ Scroll down to choose from available options. ↓

K Rend Alkali Resistant Reinforcement Mesh provides high strength, good cohesion, excellent coating and is widely used to reinforce walls. This is a genuine K Rend product, beware of cheap imitations!

Use the K Rend Accelerator to reduce drying time before scraping.

Offering a new and improved formula with reduced drying times and improved workability, GP Mix is a general purpose drymix rendering and masonry mortar requiring only the addition of water and mixing prior to use. It is designed to be used with brick and block as a masonry mortar, a rendering mortar (float coat) or as a bedding mortar for paving. When used as a render, GP Mix can be applied by hawk and trowel or through electric and diesel spray machines to receive a finish such as K Paint (Silicone Masonry Paint.)

K Rend UF Fibre Base combines the versatility of Standard Base with increased impact resistance, flexibility and improved tensile strength. Fibre Base is applied by hand.