External Wall Insulation Systems.

We are suppliers of a full range of external insulation products, we can deliver direct to site usually within 48 hours products such as EPS / Phenolic insulation of all sizes, Fixings, Beads, Baserails and all the trims you will need. Please contact us today for a full system quotation.

Typical System Build Up

1. Insulation Board: Typical 1200mm x 600mm No cut boards less than 200mm width to be used. Type and thickness to be determined
2. Basecoat: 6mm of high performance basecoat such as K Rend HP14 or Parex Maite Monocomposant.
3. Reinforcement Mesh: Overlapped 100mm. Extra patches at doors and windows
4. Render System: K Rend Primer TC or Parex 310 Primer followed by K Rend TC range or Parex DPR range of topcoats. 
5. Base Bead: Powder coated galvanised steel with PVC nose. 2.5m or 3m lengths. Wherever possible PVC noses should slide across the joint between two lengths to help maintain a true line. Stainless steel alternative available. Oversized base bead to form bellcast (20mm)
6. Base Bead Fixing: 6mm hammerfix, length and type to be determined by substrate. Maximum 300mm centres. Minimum length 60mm, hole must be minimum 10mm longer than fixing
7. Insulation Fixing: Exact type and length to be determined by system and substrate. 60mm head minimum embedment 35mm. For fixing pattern see relevant detail sheet.